2000 Chevrolet Corvette Clutch Flywheel Parts

Choose your Submodel for your 2000 Chevrolet Corvette

Showing 1 - 5 of 5 products

Sort:

Show:

Image

SKU

Product

Rating

Price

XACT Flywheel Prolite
XACT Flywheel Prolite
Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Diameter:
  - 11
  - 280
- Tooth Quantity: 168
- SFI: 1.1
- Mounting Hole Quantity: 6
- Product Weight (lbs.): 14.6
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
600585 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.

This Part Fits the Following OEM/Substitute Numbers:

2-LS1-STU, 460530, 700142, FW-LS1-SF, GF502A, SC75S

Additional Fitment Information:

Vehicle	Block	CC	Cylinder Head Type	Region	Engine	Sub Model	Aspiration	CID
2000 - Chevrolet Corvette	V	-	OHV	United States	8 Cyl 5.7L	Base	Naturally Aspirated	350

1 In Stock

$660.00 CAD

$792.00 CAD

UPC: 842385002497

XACT Flywheel Prolite
XACT Flywheel Prolite
Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Diameter:
  - 11
  - 280
- Tooth Quantity: 168
- SFI: 1.1
- Mounting Hole Quantity: 6
- Product Weight (lbs.): 14.6
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
600585 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.

Additional Fitment Information:

Vehicle	Block	CC	Cylinder Head Type	Region	Engine	Sub Model	Aspiration	CID
2000 - Chevrolet Corvette	V	-	OHV	United States	8 Cyl 5.7L	Base	Naturally Aspirated	350

1 In Stock

$660.00 CAD

$792.00 CAD

UPC: 842385002497

steel flywheel
OEM 11.75; 11 in. Diaphragm
Steel flywheel GM LSX/98-02/OEM 11 Diaphragm
Steel Flywheel
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:

Vehicle
2000 - Chevrolet Corvette

2 In Stock

$415.35 CAD

$498.42 CAD

Flywheel: Nodular Iron: Chevrolet: 1997-04 LS-1: Internal Balance: 168T
Flywheel: Nodular Iron: Chevrolet: 1997-04 LS-1: Internal Balance: 168T
Product Attributes:
- Flywheel Material: Nodular Iron
- Engine Balance: Internal Balance
- Engine: 1997-2004 Ls1,ls6
- Pressure Plate Pattern: 12in. Borg & Beck With 10mm Bolt & Dowel Pin
- Ring Gear: 168t
- Make: Chevrolet
Features:
- Cast Iron Flywheels are a inexpensive way to replace your old used flywheel with new!
McLeod nodular iron flywheels offer high-quality, yet low-cost alternatives to the hassles of resurfacing a flywheel. Nodular iron flywheels are stronger than the OEM models, and these McLeod units are direct bolt-in units. Don't overlook your flywheel when replacing your clutch. But don't resurface, replace with McLeod nodular iron flywheels

Additional Fitment Information:

Vehicle	Block	CC	Region	Engine	Sub Model	CID
2000 - Chevrolet Corvette	V	-	United States	8 Cyl 5.7L	Base	350

2 In Stock

$269.72 CAD

$323.66 CAD

Flywheel: Steel: Chevrolet: 1997-13 LS-X:6 Bolt: 168T: 28 Lbs
Flywheel: Steel: Chevrolet: 1997-13 LS-X:6 Bolt: 168T: 28 Lbs
Product Attributes:
- Flywheel Material: Steel
- Engine Balance: Internal Balance
- Engine: 1997-2013 Ls1/ls2/ls3/ls6/ls7 6 Bolt Crank
- Disc Diameter: 11in./12in.
- Clutch Pattern 2: 12in. Ls1/ls6 Diaphragm, Metric Bolts, With Dowel Pins
- Clutch Pattern 1: 11in. & 12in. B&b & Diaphragm Shouldered Bolt
- Ring Gear: 168 Tooth
- Weight: 30 Lbs
- Make: Chevrolet
Features:
- McLeod Racing Billet Steel flywheels is the best choice for customers that want a dependable good quality steel flywheel. Made from Billet steel the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.